Question: I have a Canon mx922 printer, and the error code b200 appears on the printer screen. The printer was asked to be restarted, but nothing happened. I won't be able to use my printer until the b200 support code has been removed. How do I get rid of the b200 error on my Canon printer?

This is a Canon printer-related article.

It's aggravating when you try to print an essential document and your Canon printer gives you an error number b200. On a Canon printer, this is the most often and feared error code. Because it indicates that your printer is in poor working order.

Some of you may be considering acquiring a new printer, but as you are aware, these printers are costly, therefore it is worth attempting to resolve this support code following these simple procedures.

What Causes Canon MX922 Error Code B200?

B200 is the Canon support code.

According to our study, there are various reasons why your Canon MX922 printer displays error code b200 on the printer screen.

Inside the printer, there is an ink carriage jam:- If you have had any paper jams on your Canon mx922 printer in the past, your ink carriage may have been stuck over the printer handle. As a result, before printing, remove the jammed carriage. Otherwise, the Canon mx922 printer will display the same b200 support code.

It's possible that the waste ink tank is full:- The ink waste tank is another possibility. A waste ink tank is found in some Canon Pixma MX922 printers, and it stores the leftover ink used during the cleaning process. If the tank is full, it's a good idea to check it. To remove the Canon support code b200 from the printer, clean the ink tank.

Cartridges that have dried up (because they haven't been used in a long time): The Canon mx922 printer uses two types of cartridges: 2 and 4+. If you use your printer after a lengthy period of time, the cartridge holes will have dried up, resulting in the same Canon printer error code b200.

Overheating of the print head (blocking the connection):- It happens when you print too many pages from the Canon Pixma mx922 printer at the same time, as you can see. In addition, the printer's print head becomes overheated. The print head loses contact with the cartridges during this period, and the Canon error code b200 appears on the printer screen.

Faulty Cartridges: Last but not least, if you purchased a reconditioned or non-genuine Canon mx922 cartridge. The b200 support code will also appear on your Canon mx922 printer.

Before proceeding to the repairing section of this support code b200, you should verify all of these probable causes.

Best ways to fix canon error code b200:-

You may believe that changing the print head would fix your issue. However, changing the print head costs more than purchasing a new printer. So, to delete the error number b200 from the printer, we propose that you follow these simple actions.

  • Turn the printer off and leave it alone for 30-40 minutes. All of the functionality will be reset, and the printer will be cooled down.
  • Examine the printer for any paper or carriage jams. If there are any, open the printer's front door and remove any paper jams before rotating the ink carriage.
  • Now use a computer-based printer repair tool to clean the print head.
  • The following step is to swap out the old cartridges with fresh ones.
  • On the PC, install the most recent Canon printer drivers.
  • Finally, use a damp towel or tissue paper to physically clean the print head. Clean the print head's gold strips.

Note: If you continue to see the support code b200 on the printer screen, please leave a note on the comment section for more troubleshooting and assistance.